Lee Safety Primer Feed Model 90997 Installation

See also Lee Safety Primer Feeder Model 90997 Review.

 

Lee Safety Primer Feeder
Lee Safety Primer Feeder

Reloading Instruction & Reviews

Cabela's Reloading Center 

Reloading, Precision Shooting, and Components

Reloading Equipment & Supplies

 

Installing The Lee Safety Primer Feed

 

  This is the post where the Lee Safety Primer Feeder bracket will be installed. Remove the bolt. 
  Place the thick black washer as shown. 
  Position the bracket on top of the black washer. 
  Positioning the bracket (another picture). 
  Place the odd shaped washer as shown. 
  Install the bolt and tighten snug only. 
  Snug it down so it doesn't move easily. 
  Overall view. 
  Prepare the primer feeder by adding primers as shown. 
  Make sure all primers are facing up. 
  Install the see through plastic cover. Turn cover to right to lock into place. Use care. Do not force. Be gentle.
  Cover installed.  
  Another picture with cover installed. 
  This is the slot into which the primer feeder arm will be installed. 
  Positioning the primer feeder. 
  Insert the right part of the feeder arm into the bracket slot. 
  Wiggle in the rest of the feeder arm. It may take a little jiggling and a little force. The plastic may bend slightly before it goes in. Not much though. 
  The primer feeder will be able to swing a little bit inside the bracket groove. 
  View from the right side. 
  Adjust/pivot the primer feeder around the bolt )loosen the bolt if needed) to allign the feeder with the primer arm on the press. 
  Verify allignment, then tighten the bolt to prevent the bracket from moving. 
  To load a primer into the primer arm push the feeder with your thumb as shown. 
  Push it against the primer arm until you hear a slight click and feel it feed. This may take a little practice but once you get the feel for it it becomes easy. 
  Back off and let the feeder swing back. See the primer in the primer arm. 
  The primer can now be loaded into the casing.  
  These are the parts that I did not use. 

 

 

Comments & Questions

:
:

All comments are reviewed and posted manually. Your last name and email address will not be published. Submitting URLs & SPAM through this form is not permitted.