Walther P22 Grips

 

Walther P22 Grips

P22 Accessories Magazines Holsters   Ammunition

 

Walther P22 Grips Replacement Instructions

Pictorial instructions for changing the grips of a Walther P22 Semi-Automatic Pistol. 

 

 

3/32" punch and back strap	Tools Needed Replacing the grips is very simple and fast. All you need is a 3/32 inch diameter punch (or something small) and your replacement grip (blackstrap). Make sure your P22 is unloaded before you change the grips.
Retainer Pin Location	Retainer Pin Location Locate the grip retainer pin on the handle of the gun.
Retainer Pin Removal	Retainer Pin Removal Using the punch, push the retainer pin out from the grip of the gun. It will come out either way. Push slowly and carefully. It doesn't take much force to push it out.
Pry Location	Grip Removal The old grip may be a little stuck and hard to get off with just your hands so you may have to gently pry it loose with your punch or screwdriver. The picture shows a good location where to pry it loose from.
3/32" punch and blackstrap	Grip Swings Out The bottom of the grip will swing out easily. The top of the grip has a lip that is retained by a slot in the gun handle. The grip must be pulled down to free it from the slot. You can see the lip and the slot in the pictures below.
3/32" punch, back strap & retainer pin	Grip Removed This picture shows the grip removed from the Walther P22, the grip retainer pin and the punch used to remove the pin.
Grip Slot	Slot In Handle Close-up view of where the grip goes. You can see the slot that retains the top of the grip. To install the new grip just reverse the process. It really only takes a few seconds.

Check the latest prices on the Walther P22.

 

 

 

 

Walther P22 Interchangeable Grips

The gun is shipped with two interchangeable grips. One grip is installed on the gun, the other can be found as a spare in the gun box. It's a good idea to try out both grips to see which is best suited for you. (Personally I found little difference between the two grips.) 

 

Walther P22 Interchangeable Back Straps

Having two back straps of different sizes gives the P22 the ability to accommodate different shooters with a custom fit of the hand grip to fit comfortably and securely in hands of all sizes.

 

 

Walther P22 Reviews
	Pistol Review Two years ago I purchased a P22 and have since put 16,000 rounds through it. This will not a detailed review of the guns characteristics and specifications, but rather of its reliability and performance. It is based on the performance of one gun.
	Field Strip & Cleaning Pictorial instructions for field stripping and cleaning a P22 Semi-Automatic Pistol.
	Magazine Disassembly & Cleaning Instructions Step by step disassembly and cleaning instructions (with pictures).
	Inspection Checklist Use this inspection checklist when accepting delivery of your new pistol from the dealer or inspecting a used P22 prior to purchasing.

 

 

Comments & Questions
Name:
Email address:
All comments are reviewed and posted manually. Your last name and email address will not be published. Submitting URLs & SPAM through this form is not permitted.