 How To Shoot |
 Accessories |
 Ruger LCP |
 Taurus TCP |
 Glocks |
 Walther P22 |
 S&W 22A |
 Ruger Mark III |
 Laser Bullet |
 Reloading |
- All Reviews -
Walther P22 Review
This review is based on the performance of my personal Walther P22 pistol that I have shot over 16,000 rounds through. It focuses on the gun's reliability and performance.
|
Walther P22 Background & usage
Two years ago I purchased a Walther P22 .22 caliber pistol and have since put over 16,000 rounds through it. This will not a detailed review of the guns characteristics and specifications, but rather of its reliability and performance. My P22 was purchased for $325 in Florida on 8/14/08. It was fired weekly at an indoor shooting range and cleaned and lubricated after each use. The gun has been repaired three times. Gun currently has over 16,000 rounds fired through it and is still in excellent condition.
 |
 |
 |
 |
|
| Field Stripping | Ammo Magazine | Replaceable Grips | Gun Case | Inspection Checklist |
Walther P22 - Out of the Box
Out of the box, my P22 pistol worked great. The "box" is a sturdy plastic gun case containing the handgun, one 10 round stainless steel magazine, interchangeable frame back straps, trigger lock key and plastic re-assembly rod.
Walther P22 Ammunition
From the Owner's Manual - "Malfunction may occur when ammunition with a low propellant charge is fired. Use only high velocity ammunition in your Walther P22." High velocity LR cartridges are loaded with copper plated bullets to reduce lead fouling. These come in 40 grain round nose or 36-40 grain hollow point (HP) styles.
 Left hand |
 Shoots 22LR ammo |
 Slide locked back |
 Magazine release |
 Ambidextrous grip |
 Right hand |
 Walther P22 Pistol Magazine partially ejected |
 Walther P22 Pistol Slide locked back |
Which Ammo Works Best In A Walther P22 Pistol?
When I initially purchased my Walther P22, my internet research uncovered much debate over which ammunition will work the best in the gun. The general consensus was:
-
The following ammunition was RECOMMENDED.
CCI Mini Mags, CCI Stingers, Remington High Velocity Golden Bullet, Velocitors, Remingtion Thunderbolt, Winchester wildcat, Remington Target, Federal Premium Gold, Federal High Velocity (Game-Shok). -
The following ammunition caused jams but was ACCEPTABLE for target practice.
Winchester 40 grain solids, Federal (Bulk), Winchester Xpert (bulk), Remington Golden (bulk), Remington Thunderbolt, 40gr bullet, 1255fps -
The following ammunition was NOT RECOMMENDED.
Yellow Jackets, Remington Thunderbolts, Federal ammo, Remington SubSonics, Winchester wildcats
Personal Tests Of Ammunition For The Walther P22
-
Federal High Velocity (Game-Shok) 40 grain, copper plated, solid
$6.75 per 100; Accurate shooting; 65 out of 65 shot OK. -
Federal Champion High Velocity, 40 grain
$15.99 per 500; Unjacketed lead bullet; 99 out of 100 shot OK; 1 failed to fire; 2 times slide stayed open when last round in clip fired. -
CCI Mini-Mag HP High Velocity, 36 grain, copper plated hollow point; $7.50 per 100; Accurate shooting; 50 out of 50 shot OK.
-
CCI Velocitor Hypervelocity, 40 grain, copper plated, hollow point; $6.50 per 50; Accurate shooting; 24 out of 25 shot OK; 1 round stove piped and got bent and deformed. Ejected shells tended to hit me in face.
-
Winchester Super X High Velocity: $2.49 per 50; Accurate shooting; 50 out of 50 OK; Rounds looked a little dirty.
Walther P22 Reliability
For the first 11,700 rounds fired through my P22 it shot flawlessly (except for the occasional ammo related jam). I was pleasantly surprised that this inexpensive little gun kept shooting week after week. Only after 12,000 rounds did it need any repair or show any signs of wear and tear. Descriptions of my repairs are shown below.
What Comes In The Box With A Walther P22?
A new Walther P22 (unless the Walther company recently changed it) comes with the pistol, one stainless steel 10 round magazine, one spare replaceable back strap, one trigger lock key, one recoil spring reassembly rod and one small wrench (for barrel removal).
Walther P22 Trigger Lock
The Walter P22 is designed with a trigger lock as an integral part of the handgun. The trigger lock is operated with a separate key found in the gun box. To lock the gun you simply insert the forked prongs of the key into the corresponding hole on the right side of the gun just above the trigger and turn. The hole is marked with "F" and "S" symbols to indicate the fire and safe positions of the lock. I never use the trigger lock because I find it difficult to operate because of the poor design of the key. You have to really bear down and push pretty hard on the key to lock the trigger. Also if you ever lose the key you are in trouble and will have to wait while another is ordered.
Walther P22 Review - The Good
-
Very reliable.
-
Feels good in your hand. Looks cool.
-
Little or no recoil.
-
Seems to shoot better when it's dirty (not cleaned from the previous shooting).
Walther P22 Review - The Bad
-
Poor standard sights.
-
Ammo sensitive.
Walther P22 Review Recommendation
GREAT GUN - INEXPENSIVE - RELIABLE - FUN TO SHOOT
Check the latest prices on the Walther P22.
Walther P22 Repairs
I had three repairs performed on my Walther P22 over the course of 16,000 rounds. Detailed descriptions of the repairs needed are as follows.
Repair #1
TWO SEPARATE PROBLEMS:
1. Broken trigger
2. Frequent slide return failure and jamming
Date Purchased: 8/14/08, Merritt Island, FL
Rounds fired: 11,700 (Ammunition used: Federal .22LR, 36 grain, hollow
point, copper plated, high velocity rounds)
History: For the first 8,000 rounds the gun performed flawlessly (except the
occasionally jam).
The gun was fired weekly (about 500 rounds) and cleaned after each use.
From 8,000 – 11,000 rounds jamming and slide return failures increased.
After 11,000 failures became intolerable and the trigger broke.
Trigger problem - At about round 11,700 the trigger "broke" and would remain
in the "pulled" or back position. Hammer
remains in the back position but can be manually pushed forward when the
trigger is pressed.
Slide return and jamming failures - Pistol worked almost flawlessly with for
the first 9,000 rounds then started to jam
occasionally, then more frequently.
Slide would get stuck in the back position frequently. Some spent
casings
would get stuck in the barrel.
-------------------------
Repair #2
Date Purchased: 8/14/08, Merritt Island, FL
Rounds fired: 15,000
TWO SEPARATE PROBLEMS
1. Hammer Fails To Remain In Cocked Position
About 20-30% of the time the hammer fails to stay in the fully cocked back
position between firings. This problem has started and seemed to get
increasingly worse in the past month.
2. Possible Slam Fire Occurred
After loading new magazine and releasing the slide the gun fired by itself
upon slide return. I can't be 100% sure that my finger wasn't near the
trigger but I looked at my hand position immediately after the occurrence
and my finger position was fine.
-------------------------
Repair #3
Gun: Walther P22 Pistol, serial # XXXXXXXX
Date Purchased: 8/14/08, Merritt Island, FL
Rounds fired: 15,000
Note – Gun was picked up from factory repair of hammer problem on 8/21/09.
Only shot about 150 rounds through it
before the following problems occurred.
TWO SEPARATE PROBLEMS
1. Gun will not fire -
Trigger, slide and hammer seem to work properly but gun will not fire.
Normal clicking sound only when trigger is
pulled. It is as if firing pin does not contact the round.
2. Slide moves forward when magazine is inserted – occasional problem
When slide is locked back and the magazine is forcibly inserted, the slide
comes forward by itself. This only happens
occasionally.
Feedback Messages
-------------------------
Walther P22 Repairs & Warranty
January 31, 2012
Just purchased a P22 and after reading your review was wondering if you
were satisfied with the repairs done by Walther. Have you had any
further problems with this gun and how many rounds do you now have
through it? Did Walther cover everything under warranty? Thanks.
Dave
Response - Dave,
I have needed no further repairs (no further problems) other than what
is listed on the website.
I am satisfied with the repairs done by Walther.
I used to keep track of rounds shot in each of my guns on my computer,
then my computer hard drive went belly up and I lost all the
information. If I had to guess I would say I shot about 20,000 rounds
through my Walther P22.
Since I bought the Walther I have purchased other guns and don't shoot
it as much as I used to.
You will have to read the warranty yourself. All of my repairs were
covered. I bought my Walther from a local gun shop that has an on-site
gun smith. They offer their own warranty and do all the minor repairs
themselves. For major stuff they return the gun to Walther for repair.
Have fun with your gun and don't lose that little plastic rod for
re-assembly after field stripping.
Also, reassembling after field stripping is a little tricky the first
time you do it, but after you do it a few times it's easy.
Tanner
Tanner,
Thanks so much. I'm an NRA Instructor and bought this gun, primarily, to
replace my Glock 19 with the Advantage Arms 22 Conversion that I've been
using for years. The Glock grip is just too big for a lot of women and
the Walther seems to cover all bases.
The new Ruger SR22 is supposed to be a really fine gun but very few have
it.
Regards,
Dave
Dave,
One of the best things I like about the P22 is the grip and the
way it feels and fits my hand (I don't have large hands) so it's
probably a pretty good choice for women.
I just took a look a picture of the Ruger SR22 and it looks a lot like
the Walther.
One thought about the Glock 19. If you wanted to continue using it to
teach women you may want to look into getting a mag well for it.
I have one on my Glock 19 and it makes a big difference in the grip and
feel of the gun. Women that I let try mine said they like it better with
the mag well.
Tanner
Tanner,
Not sure I understand re the mag well. The complaint I get from women is
they can't get their hand around the grip and reach the trigger.
Regards,
Dave
Dave,
Sorry, I misread what you wrote.
When you said "too big" I was thinking grip length (not thickness) and
while the mag well does not effectively decrease the grip length the
flare or angle of the mag well seems to "cup" your hand and provides
your pinky and palm with additional additional support (assuming your
hand is big enough).
It probably wouldn't help any for women with small hands.
Tanner
Tanner,
That's okay. I've been told a cop's mind works in strange and twisted
ways.
Regards,
Dave
-------------------------
Walther P22 Hammer Problem
November 29, 2010
I was shooting my P22 Walther today and somehow the hammer is locked in
the back position. I can't get it released forward. I removed the mag
and have tried everything any idea? Do I need to take it apart?
Caree
Caree,
I would try the following. Assuming no ammo in the gun.
1. Make sure an empty magazine in installed when trying to bring the
hammer forward. The hammer will not move forward when you do not have a
magazine in the gun. Hopefully the lack of the magazine is your problem.
If not try the following.
2. Move the safety back and forth a few times.
3. Use the trigger lock key to lock and unlock the trigger a few times.
4. With a magazine installed, pull back on the hammer with your thumb
the press the trigger to see if that releases it, then slowly bring the
hammer forward.
5. Field strip it to see if that frees up anything. I would not pull the
trigger while it is field stripped though.
If any of those do the trick I would appreciate you telling me what the
problem was. I would be curious to know how you fixed it. Thanks.
Tanner
-----
Tanner,
Cool name btw, thank you! I had to lock and unlock the trigger a few
times and that solved the problem! You've been so very helpful.
Caree (ICareeGuns)
-------------------------